The Shimano Acera CS-HG41 8-speed cassette has a computer designed tooth configuration with contoured shift gates, combined with close ratio gearing which allows a more efficient use of energy through finer cadence control, the result is a very...
Shimano Acera HG41 7 Speed MTB CASSETTE
TEETH: 11-28T (11-13-15-18-21-24-28)
With lockring
Hyperglide (HG) sprockets have a computer designed tooth configuration with contoured shift gates, resulting in a crisp smooth shift even under load
Close...
The new 10-52 Eagle cassette for riders who prioritize all day function over anything else. With an expanded, 520-percent gear range giving riders more ability to spin and recover on the burliest climbs. Featuring FULL PIN technology that uses...
Light and reliable
Compatible with Shimano and Sram 10 speed transmissions
Dyna-Sys Component, HyperGlide Technology
Sprockets, star and lock nut in aluminium
Silver
Art. Nr.: ICSHG8110132, ICSHG8110134, ICSHG8110136
The CS-HG400 9-speed cassette supersedes the cassettes CS-HG61-9 and CS-HG50-9. With the larger hollow spaces in the spockets a weight saving of approximately 11% was achieved. (Compared to HG50-9 at 11-34 teeth.) The cassette is available in...
Screwable (with thread). Will not fit cassette type hub with splines.
For 6-speed systems
Lightweight construction
Easy assembly feature
HG - HyperGlide
Combination of teeth: 14-28T (14-16-18-21-24-28)
Compatible chain: 6/7/8 speed chains HG/UG...
10-speed cassette for the new Dyna-Sys 10-speed drivetrain. The cassette is made with two spiders with 3 sprockets on each of the spiders for maximum stiffness. Aluminium lock ring included.
Sprockets: 11-32T , 11-34T , 11-36T
Art. Nr....
Speeds: 11-Speed (Wide Ratio)
Compatible with SHIMANO/SRAM
Type: Cassettte (will not fit hubs with thread)
Function: Fluid Drive Plus
Number of Teeth (OPTIONAL): 11-42T OR 11-46T
Gear Combination: 11-13-15-17-19-21-24-28-32-36-42 OR N/A
Spider...
Rear hub 1-speed freewheel
Teeth (Optional): 16T OR 17T OR 18T OR 19T OR 20T OR 21T OR 22T
Fits chain size: 1/2" x 1/8"
Driver: 2 Pawls
Outer body/Inner body cog: Cold Forged Steel
Screw Cap: Steel
Bearing: Loose Ball
Thread: BC1.37 x 24TPI...
Speeds: 9-Speed
Type: THREADED (not compatible with splined hubs)
Thread is the same as Shimano TZ500, so it is compatible with most threaded hubs
Designed to use with E-Bikes, but can also be used with standard bicycles
Lock Ring Type: YES...
Speeds: 8-Speed
Type: THREADED (not compatible with splined hubs)
Thread is the same as Shimano TZ500, so it is compatible with most threaded hubs
Designed to use with E-Bikes, but can also be used with standard bicycles
Lock Ring Type: YES...
High quality and performance Shimano 105 CS-R7000 11-speed cassette
Gear combinations (OPTIONAL): 11-28T OR 11-30T OR 11-32T OR 12-25T
Weight:
284 g (11-28T)
304 g (11-30T)
320 g (11-32T)
269 g (12-25T)
Combination of teeths:
11-28T:...
error Your review appreciation cannot be sent