This SRAM crankset from the Rival series is compatible with DUB bottom brackets and designed for drivetrains with two speeds in the front and twelve speeds in the rear. The X-Range spacing of 13 teeth creates a good basis for even gear graduations. The gearshifts are quick and direct. Thanks to DUB technology, the assembly of the crankset in combination with a DUB bottom bracket is very easy and you get a reliable, durable drivetrain. If you wish, you can upgrade the crankset with the Rival DUB Powermeter Upgrade Kit at a later date.
Product technical specifications
X-Range 13-tooth gradation for a wide range and harmonious gear changes
Direct, precise shifting
Durable and simple thanks to DUB technology
Can be upgraded to a power meter with the matching Upgrade Kit
Application: Road
Compatibility: 2x12-speed
Chainring Mount: 107 mm pitch circle, 4-arm asymmetrical
Series: Rival
Crank Arm Material: Aluminium
Chainring Material: Aluminium
Gradation: 33-46
Crank Arm Length (optional): 160.0 mm, 165.0 mm, 170.0 mm, 172.5 mm, 175.0 mm
Chainline: 45.0 mm
Axle Diameter: 28.99 mm
TECHNOLOGIES
DUB The unit of crankshaft and bottom bracket is the heart of the DUB technology. Stiffness meets durability. SRAM has gone a step further and made everything even easier and better. It is the system approach through the integration of chainring, crank, shaft and bottom bracket that is decisive for better drivetrain performance.
X-RANGE was developed with the possibilities of today's dropbar bikes in mind. It is distinguished by a wide gear range with smooth, even gear changes. The combination of chainrings with 13-tooth spacing with a high bandwidth cassette, starting with a 10-tooth sprocket, ensures well thought-out, homogeneous gear jumps and always puts you in the right gear. In combination with AXS, you can make various shift settings and personalise your drivetrain to suit you.
00.6118.614.006
5 Items
Specific References
EAN13
710845864599
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
PowerGlide II 8-speed performance in an steel and DuraBlast cassette.
For 8-speed SRAm systems
Teeth (optional): 11-32 OR 11-30 OR 11-28
Lock Ring Material: Steel
Sprocket Material DuraBlast
Compatibility Performance optimized with SRAM Chains...
The Shimano Acera CS-HG41 8-speed cassette has a computer designed tooth configuration with contoured shift gates, combined with close ratio gearing which allows a more efficient use of energy through finer cadence control, the result is a very...
Product technical specifications
Go further with smooth and long-lasting e-biking performance
Up to three times the durability of HYPERGLIDE in high chain tension conditions
Smooth 2-way shifting (inward and outward) with reduced pedal shock...
Product technical specifications
520% range. Full X-SYNC for best-ever inboard and outboard shifting performance under load. Optimized gear steps on low end.
55mm chainline compatibility for more moderate chain angle, longer wear and greater...
No matter what kind of 11-speed drivetrain you have2x, 1x, wide-range or narrow-rangean array of PG-1130 cassette options are available with smooth, consistent shift performance at an affordable price. Personalize your gearing with one of five...
Thumb shifter
Side: Right
Speeds: 5 (indexed)
Lever Material: Engineering Polymers
Clamp Material: Steel
Cable Type: Galvanized
Cable Length: 1900 mm
Handle Bar Diameter: 22.2 mm
Weight: 64.5 g
NX Eagle Single Click trigger shifter limits over-shifts that rob performance and battery life on E-MTBs. Designed to precisely control gear selection in higher-torque and lower-cadence E-MTB applications, the NX Eagle single click shifter also...
Grip shifter compatible with SHIMANO NEXUS 8
Material: plastic/rubber
Number of gears: 8 speed
For handlebar diameter: 22.2 mm (standard)
Grip length: 50 mm
Inner cable length: 2250 mm
Position: right
Prekės techninės specifikacijos
Dydis: 1/2" x 11/128"
Plotis: 5.2 mm
110 narelių svoris: 239 g
Narelių skaičius: 130
Suderinama su visomis 12 pavarų perjungimo sistemomis
Specialiai sukurta el. dviračiams su centre esančiu varikliu, tačiau tinka...
Shimano Altus FC-M315 is a 7/8 Speed drivetrain compatible Crankset . A two chainrings - 35x22, 175mm crank arm length. Steel Sprockets with alloy crank arms.
Complete set - LEFT and RIGHT crankarms are included!
Compatible bottom-bracket Type:...
error Your review appreciation cannot be sent