SRAM DUB crank standard, built on a 29mm spindle, allows for a more contamination resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, a snug & secure fit that also fully protects the face of the bearing delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with un-paralleled durability & efficiency.
CeramicSpeed Standard Ceramic Bearings - low friction, high durability
Bearing race material: hardened-steel
PRESSFIT, bottom bracket type: BB86
Frame shell size (width): 86.5 mm
For frame shell inner diameter: 41mm
Use: Road bicycles
Compatible with: ROAD 29mm SRAM DUB cranks
In the box:
2 CeramicSpeed Bearings
Dustcovers
Plast-sheet
4 x 1 mm spacers
Spacer tube
CeramicSpeed All Round Grease
Sticker Sheet
RELATED TECHNICAL INFORMATION: CeramicSpeed Standard Ceramic Bearings - put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Ceramic Bearings typically have frictional drag of 0.3-0.4 watts per set. Thats in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings.
All Round Grease
Designed to suit the maintenance of CeramicSpeed Bearings, the CeramicSpeed All-Round Grease maximizes your bearings lifetime and performance. This type of grease is a low to medium viscosity lubricant and works as the best compromise between friction influence and lifetime. We recommend it for optimal use in dry and sunny weather conditions, where no or very little contamination threatens the bearing. The application covers mostly road riding conditions, however it can be used off-road in the same weather settings, on all types of CeramicSpeed Bearings. When lubricating your bearings, we recommend a fill rate of 60-80%.
Maintenance:
Depending on the riding conditions it is recommended once a year to re-grease your CeramicSpeed Bearings.
If used in very wet or muddy conditions, maintenance might be required more often.
If high pressure washer is used, please do not point jet stream to any of bearings (headset, bottom bracket, wheel hub, full suspension links) as it may wash out the grease.
CER106751
5 Items
Specific References
EAN13
5711050065035
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Kvadratinės jungties (Square Taper) kasetinis miniklio velenas su uždarais guoliais
Plieniniai kaušeliai
Sriegis: BSA
Korpuso ilgis: 68 mm
Bendras ašies ilgis (pasirinktinai): 119 mm / 112,5 mm / 127 mm
A good quality Shimano bottom bracket. Accurate bearings for smooth operation with improved durability. Durable sealed cartridge bottom bracket with square tapered axle. Sealed cartridge bearing assembly keeps out mud, dirt and water. Better...
Press-Fit BB use 24 mm axle and bearings, because 24 mm diameter axle and bearings offers the best balance of rotating performance, stiffness, strength, sealing, weight, for press-Fit type as well.
BB-Type: Press Fit (41x24mm)
Press-Fit BB shell...
Įpresuojamo tipo Shimano Deore MT500 miniklio velenas
Korpuso diametras: 41 mm
Korpuso plotis: 89.5-92 mm
Ašies diametras: 24 mm (Hollowtech II)
Svoris: 72 g
Kairės pusės guoliai, dešinės pusės guoliai, korpusas, 2.5mm tarpinė
DEORE XT cranks turn on an updated HOLLOWTECH II press fit (BB-MT800-PA) bottom bracket. Using smaller, lighter bearings and a seal system proven on both XTR and road groups, MT800 bottom bracket reduces weight and bearing drag while improving mud...
error Your review appreciation cannot be sent